• TOP
    • 钣金加工自动化生产线的作业工序
    • 本站编辑:杭州洛工钣金有限公司发布日期:2019-12-26 19:44 浏览次数:

     一条典型的钣金加工自动线,主要包括料库、激光切割机、自动上下料以及机器人折弯单元。这是一条典型的钣金加工自动线,主要包括料库、激光切割机、自动上下料以及机器人折弯单元,而这些工序都离不开搬运,在机器人机械手上安装电永磁铁磁力吸盘能加快作业流程,安全高效!工作流程:

      料库上料——操作人员利用珩车或叉车将原料运送至堆垛机上,堆垛机将板料运送入库。原料出库——电动原料台根据生产需求从料库中取出整包板料。

      上料——桁架机械手电永磁铁吸盘移动至激光上料区吸取板料,然后将板料送至激光切割机交换工作台,Z轴移至安全位置,激光切割机开始工作。

      下料——完成板料切割后,桁架机械手移至工作台上方,机械手下方安装电永磁铁磁力吸盘吸附成品板料搬运到电动台车,确保成品的完整度。

      分拣转运——人工清除废料后,机械手电永磁铁吸盘吸附切割机后快速翻转,运送至折弯单元上料区域。

    f201706280923497916.jpg

      自动折弯——机器人电永磁铁机械手从电动台车上抓取切割件,按照设定的程序自动折弯,完成后码垛在下料托盘上。

      以上六道工序作业中都有输送搬运的动作,为了满足企业不同需求,工件的特殊性,根据工艺配备的电永磁铁磁力吸盘,不掉工件的同时确保工件精度。安全适用!

    A typical automatic line of sheet metal processing, mainly including material warehouse, laser cutting machine, automatic loading and unloading and robot bending unit. This is a typical automatic line for sheet metal processing, mainly including material warehouse, laser cutting machine, automatic loading and unloading, and robot bending unit. These processes are inseparable from handling. The installation of electromagnetic suction cup on robot manipulator can speed up the operation process, safety and efficiency! Workflow:

    Stock loading - the operator uses a honing car or forklift to transport the raw materials to the stacker, and the stacker transports the sheet materials to the warehouse. Raw material warehouse out - the electric raw material platform takes out the whole package of sheet materials from the material warehouse according to the production demand.

    Feeding - the permanent magnet suction cup of the truss manipulator moves to the laser feeding area to absorb the sheet material, and then sends the sheet material to the laser cutting machine exchange workbench, the Z axis moves to the safe position, and the laser cutting machine starts to work.

    Blanking - after the sheet metal cutting is completed, the truss manipulator is moved to the upper part of the worktable, and an electric permanent magnet magnetic suction cup is installed under the manipulator to absorb the finished sheet metal and transport it to the electric trolley to ensure the integrity of the finished product.

    Sorting and transfer: after the waste is removed manually, the mechanical hand, electric permanent magnet suction cup will absorb the cutter and turn it over quickly, and then it will be transported to the loading area of the bending unit.

    Automatic bending: the robot electric permanent magnet manipulator grabs the cutting parts from the electric trolley, bends them automatically according to the set procedure, and stacks them on the blanking tray after completion.

    In order to meet the different needs of the enterprise and the particularity of the workpiece, the electro-permanent magnet magnetic chuck equipped according to the process ensures the accuracy of the workpiece while not dropping the workpiece. Safe for use!